Kenwood KDC-W7037 Instruction Manual

Kenwood KDC-W7037 Instruction Manual Manual pdf 39 page image

Connecting Wires to TerminalsP.CONTANT.CONTMUTEEXT.CONT1234567812345678FRONTREARSUBWOOFERBattery wire (Yellow)Ignition wire (Red)FM/AM antenna inputAntenna Cord (ISO)Antenna Conversion Adaptor(ISO–JASO) (Accessory3)To connect the Kenwood navigation system, consultyour navigation manual.Wiring harness(Accessory1)If no connections are made, do notlet the wire come out from the tab.Power control/Motor antennacontrol wire (Blue/White)TEL mute wire (Brown)Connect either to the power control terminalwhen using the optional power amplifier, or to theantenna control terminal in the vehicle.Connect to the terminal that is grounded wheneither the telephone rings or during conversation.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BSee next pageTo Kenwood disc changer/External optional accessoryTo connect these leads, refer to the relevantinstruction manuals.Rear left output/Sub Woofer left output (White)Rear right output/Sub Woofer right output (Red)USB connector (1m)(KDC-W7537U/W7537UY only)To USB deviceFuse (10A)Front left output (White)Front right output (Red)External amplifier control wire (Pink/Black) To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.To External Display/Steering remoteAUX input (Stereo)Use the mini-plug which is stereo type and does not haveany resistance.Do not remove the cap when you do not use the USBcable. The connector will cause the unit to malfunctionif it gets in touch with any metallic part of the vehicle.English | 39