Kenwood KDC-W7037 Instruction Manual

Kenwood KDC-W7037 Instruction Manual Manual pdf 31 page image

English | 31Other than Standby modeB.M.S. Frequency OffsetSetting the central frequency, boosted by B.M.S.Display Setting"AMP FREQ : Normal" Boost with the normal central frequency."AMP FREQ : Low" Drop the normal central frequency 20%.When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to the unit.1 Select AMP Control modeTurn the Control knob.Select the "AMP Control" display.2 Enter AMP Control modePress the Control knob for at least 1 second.3 Select the AMP Control item for adjustmentPush the Control knob towards up or down.⁄• For the details on the AMP Control item, see theInstruction manual attached to the LX AMP.4 Adjust the AMP Control itemPush the Control knob towards right or left.5 Exit AMP Control modePress the [FNC] button.⁄• You cannot use the LX AMP operation during standbymode.News Bulletin with Timeout SettingThe tuner automatically changes when a newsbulletin starts even if the radio is not being listenedto. Also, you can set the time interval wheninterruption is prohibited.Display and Setting"News : OFF""News : 00min"…"News : 90min"When you set "News : 00min" — "News : 90min",the News Bulletin Interrupt function is ON.When the news bulletin starts, "NEWS" is displayed,and the tuner changes to the news bulletin.⁄• If you choose the "News : 20min" setting, further newsbulletins will not be received for 20 minutes once thefirst news bulletin is received.• The news bulletin volume is the same level that was setfor (page 17).• This news bulletin function is only available if the desiredstation sends PTY-code for news bulletin or belongs to-Network sending PTY-codefor news bulletin.• When the News Bulletin Interrupt function is ON, thetuner changes to an FM station.