English | 29In Standby modeSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC : ON" Synchronizes the time."SYNC : OFF" Adjust the time manually.⁄• It takes 3 to 4 minutes to synchronize the clock.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI : ON" LED flashes."DSI : OFF" LED OFF.In Standby modeSelectable IlluminationSelecting the button illumination color as green orred.Display Setting"Button : Red" The illumination color is red."Button : Green" The illumination color is green.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This function iseffective when you are driving at night.Display Setting"Display : ON" Keeps the display on."Display : OFF" Turns off the display when you perform nooperation for 5 seconds.⁄• Set the Display Illumination Control when the (page 35) is set to OFF.• When the display is off, pressing any key will turn on thedisplay.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Turning off the power• During function control, such as the Menu System, thedisplay stays on.In Standby modeDimmerDimming this unit’s display automatically when thevehicle light switch is turned ON.Display Setting"Dimmer : ON" The display dims."Dimmer : OFF" The display doesn’t dim.