16 | EnglishGeneral featuresDisplay Type FG-Analyzer Stop WatchThe control of stop watch can be started by G-Analyzer function.¤• Do not use G-Analyzer stop watch on the Public roads.1 Enter G-Analyzer Stop Watch modeUsing the Control knob, select "DISP" > "GMA"> "STOP.W".For the operation method, refer to Control mode> (page 10)."STOP WATCH" is displayed.2 Make the counter readyPress the Control knob."Ready" is displayed.3 Start CountWhen G in the vertical direction is detected duringthe travel, the count automatically starts."Running" is displayed.⁄• You can also start the counter by pressing the Controlknob.4 Stop CountPress the Control knob."Stop" is displayed.⁄• The control will start again when you accelerate or pressthe Control knob.Do the operation after step2.When you Reset the Count(While "Stop" is displayed)Press the Control knob for at least 1 second.⁄• You can reset of count when the count is stopped.5 Exit G-Analyzer Stop Watch modePress the [FNC] button.⁄• When Power off (ex; ACC OFF) while counting, the valueof 1 second or less will be "00".Display Type FG-Analyzer Horsepower AnalysisThis measures the horsepower and displays graphand max power. It automatically saves the highestrecord.¤• Do not use G-Analyzer Horsepower Analysis on thePublic roads.• Do not use this product in any way that prevents youfrom driving safely.• Follow all driving laws and use common sense whenusing this product.⁄• Before alternating G-Analyzer Horsepower Analysis, youare required to setup (page 18) and (page18).1 Enter G-Analyzer Horsepower Analysis modeUsing the Control knob, select "DISP" > "GMA"> "HP".For the operation method, refer to Control mode> (page 10)."HORSEPOWER" is displayed.Previous max power and record are displayed.2 Begin measurementPress the Control knob."Ready" is displayed.3 Start the car"Measure" is displayed.After 15 seconds of measurement, the result isdisplayed.Display the resultThe graph shows the variation in horsepowerbetween 0.1 to 15.0 seconds. The maximum poweris displayed in red and the markings provided atintervals of 5 seconds are displayed in blue.¤• Pressing the Control knob also begins the measurement.To prevent danger, push the control knob before startingthe car.4 To display the maximum power in the sectionPush the Control knob towards right or left.Each time you push the Control knob, themaximum power in the section is displayed.5 Exit G-Analyzer Horsepower Analysis modePress the [FNC] button.
