Kenwood KDC-X891 Instruction Manual

Also see for KDC-X891: Firmware update guide Installation manual Instruction manual

36 | EnglishMenu systemIn Standby modeSource Select ModeSetting up the Source Select mode.Display Setting"SRC Select : 1" Displays source icons for your choice."SRC Select : 2" Allows you to select sources one after another.In USB mode with iPod connectediPod mode settingSetting up the iPod operation method in File Select.Display Setting"iPod Mode : ON" Uses the operation method similar to that ofiPod."iPod Mode : OFF" Uses the operation method different from thatof iPod.In Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"Beep : ON" Beep is heard."Beep : OFF" Beep canceled.In Standby modeManual Clock Adjustment⁄• You can do this adjustment when the Clock> (page 37) is set as OFF.1 Select Clock Adjustment modeTurn the Control knob.Select the "Clock Adjust" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Selecting the item (hours or minutes) to adjustPush the Control knob towards right or left.The items that are blinking are items that you canadjust.4 Adjust each itemTurn the Control knob or push it towards up ordown.5 Exit Clock adjustment modePress the [FNC] button.In Standby modeDate Adjustment1 Select Date Adjust modeTurn the Control knob.Select the "Date Adjust" display.2 Enter Date Adjust modePress the Control knob for at least 1 second.The date display blinks.3 Selecting the item (day, month, or year) toadjustPush the Control knob towards right or left.The items that are blinking are items that you canadjust.4 Adjust each itemTurn the Control knob or push it towards up ordown.5 Repeat step 3 and 4 operation and adjust thedate.6 Exit Date adjustment modePress the [FNC] button.