42|EnglishMenu systemOther than Standby modeAudio Preset MemoryRegistering the value setup by Sound Control. Thememory cannot be erased by the Reset button.1Setup Sound ControlRefer to the following operations to setup theSound Control.- - 2Enter Menu modeUsing the Control knob, select "MENU".For the operation method, refer to Control mode> (page 10)."MENU" is displayed.3Select Audio Preset modeTurn the Control knob.Select the "Audio Preset" display.4Enter Audio Preset modePress the Control knob for at least 1 second.5Select the Audio Preset MemoryTurn the Control knob.Select the "Memory" display.6Determine whether to put the Audio Preset inthe memoryPress the Control knob."Memory?" is displayed.7Put the Audio Preset in the memorySelect "YES" using the Control knob."Memory Completed" is displayed.8Exit Audio Preset modePress the [FNC] button.⁄• Register 1 pair of Audio Preset Memory. You cannotregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items cannot be registered.Volume, Balance, Fader, Loudness, Volume offset, DualZone System, Rear VolumeOther than Standby modeAudio Preset RecallRecalling the sound setup registered by