English | 47ANT.CONTMUTEP.CONTFRONT • LFRONT • RREAR • LREAR • R–+REMO.CONTFRONTSUBWOOFERREARConnecting Wires to TerminalsFM/AM antenna inputFront left output (White)Front right output (Red)Fuse (10A)Wiring harness (Accessory1)White/BlackGray/BlackGreen/BlackPurple/BlackWhiteGrayGreenPurpleTo front left speakerTo front right speakerTo rear right speakerTo rear left speakerIgnition wire (Red)Battery wire (Yellow)Ground wire (Black) - (To car chassis)Ignition key switchCar fuse box (Main fuse)ACCCar fuse boxBatteryIf no connections are made, do not let the wire come out from the tab.Rear left output (White)Rear right output (Red)Power control wire (Blue/White)Motor antenna control wire (Blue)Dimmer control wire (Orange / White)When using the optional power amplifier, connect to its power controlterminal.To car light control switchDepending on what antenna you are using, connect either to thecontrol terminal of the motor antenna, or to the power terminal for thebooster amplifier of the film-type antenna.External amplifier control wire(Pink/Black)To "EXT.AMP.CONT." terminal of the amplifier having the external ampcontrol function.Sub Woofer left output (White)Sub Woofer right output (Red)To connect the Kenwood navigation system, consult yournavigation manual.TEL mute wire (Brown) Connect to the terminal that is grounded when either the telephonerings or during conversation.To connect these leads, refer to the relevantinstruction manuals.To Kenwood disc changer/ External optional accessoryTo use the steering wheelremote control feature,you need to an exclusiveremote adapter (notsupplied) matches your caris required.Steering remote control(Light Blue/Yellow)USB connector (1 m)⁄• Do not remove the cap when youdo not use the USB cable. Theconnector will cause the unit tomalfunction if it gets in touch withany metallic part of the vehicle.• Fasten the connector with thetape so that the cable will notcome off.⁄⁄AUX input (Stereo)Use the mini-plug which is stereo type and does nothave any resistance.To USB deviceTape