Kenwood KDC-X891 Instruction Manual

Also see for KDC-X891: Firmware update guide Installation manual Instruction manual

English | 17⁄• Like your vehicle’s speedometer, G-Analyzer is no morethan a measuring function. The HP or G value measuredby this unit may not be completely accurate due to itssimplified method of measurement. The G-Analyzer isonly for reference and should not be used to confirm thehorsepower specifications of your vehicle.• Measuring after starting the car lowers the accuracy.• The record will not be renewed if the measurement isdiscontinued.• The graph’s scale adjusts automatically to thehorsepower value.• The value of max power and record can be reset by Analyzer Reset> (page 17).Display Type FG-Analyzer ResetResets the value of G-Meter, G-Counter and G-Analyzer Horsepower Analysis.1 Enter G-Analyzer Reset modeUsing the Control knob, select "DISP" > "GMA"> "RESET".For the operation method, refer to Control mode> (page 10)."G-RESET" is displayed.2 Select the Reset itemTurn the Control knob.Display Setting"Meter Reset" Reset the value of G-Meter."Power Reset" Reset the value of G-Analyzer HorsepowerAnalysis."Counter Reset" Reset the value of G-Counter.3 Determine the item you want to resetPress the Control knob.4 Reset the valueSelect "YES" using the Control knob."Reset OK" is displayed.5 Exit G-Analyzer Reset modePress the [FNC] button.Display Type FG-Counter Level setingCalibrating G-Point. Setting the level according tothe kinds of vehicles.1 Enter G-Counter Level setting modeUsing the Control knob, select "DISP" > "GMA"> "LEVEL".For the operation method, refer to Control mode> (page 10)."G-COUNTER LEVEL" is displayed.2 Select the G-Counter LevelTurn the Control knob.Display Setting"Level1" Counter is easy to go up."Level2"…"Level3" Counter is hard to go up.3 Exit G-Counter Level setting modePress the Control knob.⁄• In the case of driving situations calling for fewaccelerations, set the G-Point up to "Level1". In the caseof frequent accelerations, set it up to "Level3".