English 17Speaker setting flowThe detailed settings below allow you to enjoy full performanceof the receiver according to the environment of your listeningroom.Speaker settings consist of 4 elements.Speaker Setup ("SP SETUP") *Select whether each speaker channel is used or, if used, its size.The Easy Setup function also allows you to make speaker settingseasier.See ^Test Tone ("TEST TONE") *Select the output level from each speaker.Distance ("DISTANCE") (Select the distance between each speaker and the listeningposition.Low Frequency Effects Level ("LFE LVL") (Select the level of bass audio enhancement.Low Frequency Effect channel delivers separate non-directionalbass signals to the subwoofer for more dynamic deep bass soundeffects.Speaker settings completed!Getting into the setup modeThe setup procedure is identical for all of the setting elements.Once you remember the following procedure, you can easily setup other setting elements.MULTI CONTROLSETUPSETUPMULTI CONTROL/Oœ Press [SETUP] to enter the setup mode.∑ Use [MULTI CONTROL 5/∞] to select the element tosetup.Display Selection"SP SETUP" Speaker setup"TEST TONE" Test tone"DISTANCE" Distance"LFE LVL" Low frequency effects level"EXIT" Exit the setup mode.é Press [SETUP] to get into the setup mode of theselected element.To exit the setup modeSelect "EXIT" in the step ∑ and press [SETUP].