Kenwood KRF-V5200D Instruction Manual

Also see for KRF-V5200D: Service manual

32 EnglishFine adjustment of the soundYou can make further adjustments to the sound while listening toplayback in the surround mode.MULTI CONTROLMULTI CONTROL/OSOUNDSPEAKERS ON/OFFœ Press [SOUND] until the desired item appears onthe display.Each time you press the key, the menu changes asfollows. Note that some items are not displayeddepending on speaker settings and listen mode.Display Adjustment Range"C" Center speaker level * 1 -10 – +10dB"RS" Surround right speaker level *1 -10 – +10dB"LS" Surround left speaker level *1 -10 – +10dB"SW" Subwoofer level *1 -10 – +10dB"INPUT" Input level *2 -6, -3, 0"NIGHT" Midnight mode * 3 "ON", "OFF""PANORAMA" Panorama mode *4 "ON", "OFF""DIMENSION" Dimension * 4"CENTER WIDTH" Center width *4Input source name Exit the adjustment mode.*1 The adjustment is only temporary for the current input selection.The value will return automatically to the original setup valuewhen the power is turned on/off or when the input selection ischanged.* 2 Analog mode only*3 Dolby Digital and DTS mode only*4 Pro Logic II Music mode only.∑ Use the [MULTI CONTROL 5/∞] to adjust thesetting as desired.Speaker level adjustmentSpeaker level adjustmentThe output level from the desired speaker channels can be fineadjusted according to the properties of each disc.The adjustment is only temporary for the current input selection.The value will return automatically to the original setup valuewhen the power is turned on/off or when the input selection ischanged.œ Press [SOUND] repeatedly until the speaker to beadjusted appears on the display. ("C", "RS", "LS", or"SW")∑ Use the [MULTI CONTROL 5/∞] to adjust the level.Input level adjustment (analog sourcesInput level adjustment (analog sourcesonly)only)If the input level of an analog source signal is too high, the CLIPindicator will blink to indicate. Adjust the input level.œ Press [SOUND] repeatedly until "INPUT" appearson the display.∑ Use the [MULTI CONTROL 5/∞] to adjust the level.Midnight mode (Dolby Digital and DTSMidnight mode (Dolby Digital and DTSmode only)mode only)When watching movies at night, you might not be able to raisethe volume as loud as normal. Midnight mode compresses thedynamic range of previously specified heavy sound passage ofthe Dolby Digital and DTS mode sound track (like scenes withsudden increases in volume) to minimize the difference in volumebetween the scenes with heavy sound passage and scenes withnormal sound passage. This makes it easy to hear all of the soundtrack, even when listening at low volumes.œ Press [SOUND] repeatedly until "NIGHT" appearson the display.This can be selected only if "CD/DVD", "DVD/6CH" or"VIDEO2" is selected as the source and the listen modeis set to "DOLBY DIGITAL" or "DTS".∑ Use [MULTI CONTROL 5/∞] to select the "ON" or"OFF" setting.• Some Dolby Digital or DTS software may not be compatible withthe Midnight mode.Further adjustments