28 EnglishRDS Auto MemoryThis function automatically stores up to 40 RDS stations in thepreset memory. In order to use the PTY function, the RDS stationsmust be stored in the preset memory using the RDS AUTOMEMORY function.TUNERAUTO MEMORYBANDœ Use [TUNER] to select the tuner.∑ Use [BAND] to set the broadcast band to "FM".é Press [AUTO MEMORY].• After a few minutes, up to 40 RDS stations are preset in order fromchannel "01".• Stations already stored in the preset memory may be replaced byRDS stations. (i.e., If the RDS AUTO MEMORY function detects 15RDS stations, the stations currently preset at numbers 01–15 willbe replaced by the RDS stations.)Presetting radio stationsmanuallyThe RDS auto memory function assigns preset numbers to RDSstations starting from preset number "1". Therefore, be sureto execute the RDS auto memory function before using thefollowing operations to manually store AM stations and other FMstations, and RDS stations.See .MULTI CONTROL/OMEMORYœ Tune to the station you want to store.∑ Press [MEMORY] while receiving the station.Proceed to step é within 20 seconds.(If more than 20 seconds elapse, press [MEMORY] again.)é Use [MULTI CONTROL 5/∞] to select one of thestation presets (1 – 40).® Press [MEMORY] again to confirm the setting.• Repeat steps œ, ∑, é, and ® to store as many stations asnecessary.• If you store a station at a previously used preset, the previousstation will be replaced by the new one.Listening to radio broadcasts