26 EnglishDVD 6-channel playbackUsing a DVD player or the like equipped with six (5.1) outputchannels and this unit, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signalitself is also acceptable.INPUT SELECTORVOLUME CONTROLVOLUME /oINPUT MODEDVD/6CHPreparations• Connect your DVD player to the DVD/6CH INPUTjacks of this unit.• Turn on all other components that will be used.• Complete .œ Select "DVD/6CH" as the input source.∑ Press [INPUT MODE] to select "6CH INPT".é Start playback of a DVD disc.® Adjust the volume.Notes:• It is not possible to adjust the speaker level or sound effect([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] willnot be functional) of the channels separately when this unit is inthe 6CH INPUT mode. Adjust the speaker level with the controlsof the DVD player. Refer to the Instruction manual of the DVDplayers for the detailed operating instructions.• For the powered subwoofer, you can adjust the volume of thesubwoofer using the subwoofer’s own volume control.96kHz LPCM playback96kHz LPCM playbackThis unit is compatible with the 96kHz LPCM playback. To play a96kHz DVD, set the listen mode to "STEREO".• In "F-AUTO" input mode, the listen mode will automatically beSTEREO.• When in "D-MANUAL" input mode (listen mode is not STEREO),"FS 96kHz" will appear in the display and no sound can be heardfrom the speakers.Press [LISTEN MODE] (the listen mode changes to the "STEREO"mode) to output sound from the speakers.Ambience effects