English 21Listening to a source componentVOLUME CONTROLVOLUME /oINPUT SELECTOR AV AUXœ Select the source you want to listen to.When using the remote control unit:Use the Input source keys to select a source.The following input source keys are prepared on theremote control unit:• Tuner (FM/AM broadcast reception)• "CD/DVD"• "MD/TAPE"• "VIDEO1"• "VIDEO2"• "DVD/6CH"• "AUX"• "AV AUX"When using the main unit:Use [INPUT SELECTOR] to select a source.The input sources change as shown below with [INPUTSELECTOR]:1 Tuner (FM/AM broadcast reception)2 "CD/DVD"3 "MD/TAPE"4 "VIDEO1"5 "VIDEO2"6 "DVD/6CH"7 "AUX"• "AV AUX" can be selected with [AV AUX].∑ Start playback from the selected source.é Use [VOLUME %/fi] to adjust the volume.Listening to music with PUREAUDIO MODEThe PURE AUDIO MODE allows you to enjoy music sources inhigh-quality stereo.PURE AUDIO MODEPURE AUDIO MODEœ Select the music source you want to listen to.∑ Start playback from the selected source.é Press [PURE AUDIO MODE].• While in PURE AUDIO MODE, the listen mode is set to stereo.• The display will be turned off and PURE AUDIO MODE indicatorlights up.PURE AUDIO MODE indicatorPURE AUDIO MODEPURE AUDIO MODETo cancelPress [PURE AUDIO MODE] again.• PURE AUDIO MODE is also cancelled when listen mode ischanged. See . ∞Notes:• When the input mode is "6CH INPT", the listen mode does notchange. ( ))• During PURE AUDIO MODE, no video signal is output.• When the PURE AUDIO MODE is canceled, the listen moderemains in stereo if the input signal is digital.Input source keys