Kenwood KRF-X9070D Instruction Manual

Also see for KRF-X9070D: Service manual Instruction manual Instruction manual

Contents

Kenwood KRF-X9070D Instruction Manual Manual pdf 14 page image

14 ENCOAXIAL OPTICAL OPTICALVIDEO 3OPTICALMONITORCD/DVDDIGITAL IN DIGITAL OUTDVD/6CHVIDEO2CD or DVD playerDigital connectionsThe digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)format digital signals.If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully. 0COAXIALDIGITALOUT(AUDIO)Connect the video signal and digitalaudio signals to the VIDEO 3 jacks.(See “Connecting video components”.)#DOLBY DIGITAL RFOUT (AUDIO)OPTICAL DIGITAL OUT (AUDIO)LD playerPCM OUTComponent with DTS,Dolby Digital, or PCMOPTICAL DIGITAL OUTSetting up the systemRFdigitaldemodulator(DEM-9991D)(sold separately)OPTICAL DIGITAL IN (AUDIO)Optical fiber cableComponent with DTS,Dolby Digital, or PCMCOAXIAL DIGITAL OUTOpticalfiber cableCOAXIAL DIGITAL OUT (AUDIO)Connect the video signal and analogaudio signals to the VIDEO 2 jacks.(See “Connecting video components”.)#To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)The RF digital demodulator (DEM-9991D) may not be on the market in concern areas countries.OPTICAL DIGITAL OUT (AUDIO)Optical fiber cableMD recorder