Kenwood KRF-X9070D Instruction Manual

Also see for KRF-X9070D: Service manual Instruction manual Instruction manual

Contents

Kenwood KRF-X9070D Instruction Manual Manual pdf 29 page image

29 ENRecording audio (analog sources)MD/TAPERecording a music source1 Use the Input Selector keys to select the source (other than “MD/TAPE”) you want to record.2 Set the MD or TAPE recorder to record.3 Start playback, then start recording.Recording video1 Use the Input selector keys to select the video source (other than“VIDEO 1”) you want to record.2 Set the video deck connected to VIDEO 1 to record.• Select the REC mode to record a digital input source.3 Start playback, then start recording.• Recording may not be normal for some video software. This is dueto the copy guard condition. pRecording audio (digital sources)Switch on the REC mode to record a digital input source.Usually use the AUTO REC mode to record audio input sources. Whenthe digital mode changes during recording in the AUTO REC mode, theaudio input source may be interrupted momentarily.Recording music in AUTO REC or MANUAL REC modeInput SelectorDIMMER1 Use the Input Selector keys to select the source (CD/DVD,DVD/6CH, VIDEO 2, VIDEO 3) you want to record.2 Set the MD or TAPE recorder to record.Recording3 Press and hold the DIMMER key for more than 2 seconds toselect the AUTO REC or MANUAL REC mode.1 REC MODE off : The digital input record mode isswitched off.2 AUTO REC mode : The digital input signals (DTS, DolbyDigital, or PCM) are identifiedautomatically and converted intostereo signals that are ready forrecording.3 MANUAL REC mode : The input signal type at the momentthis mode is selected is heldthroughout this mode.For AUTO REC mode :LS SBSL SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFELS SBC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFESL SRFor MANUAL REC mode :LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX4 Start playback, then start recording.• If the audio reproduction stops in the middle due to change in theinput signals, etc., press the DIMMER key.