Kenwood KRF-X9070D Instruction Manual

Also see for KRF-X9070D: Service manual Instruction manual Instruction manual

Contents

Kenwood KRF-X9070D Instruction Manual Manual pdf 30 page image

30 ENListening to radio broadcastsPTYBAND MULTI CONTROLTUNER AUTOAUTOTUNE – /+TUNERBANDMULTI %/fiProceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY keyagain).MULTI CONTROLMEMORYTUNERPresetting radio stations manually1Tune to the station you want to store.2Press the MEMORY key while receiving the station.Blinks for 5 seconds Lights for 5 secondsLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYSTEREOTUNEDSurround EXMEMORY3Use the MULTI CONTROL knob to select one of the stationpresets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3 and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.The receiver can store up to 40 stations in the memory and recallthem by one-touch operation.Tuning radio stations1Use the TUNER key to select the tuner.2Use the BAND key to select the desired broadcast band.Each press switches the band.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX3Use the AUTO key to select the desired tuning method.Each press switches the tuning method to either auto or manualtuning.“AUTO” indicator lights up in the display.CAL 6CH INPUTXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIAUTO DETECT THX RDSRTYMEMOSTEREOTUNEDSurround EXAUTO• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4Use the MULTI CONTROL knob or MULTI %/ fikeys, orTUNE – / + keys to select the station.“STEREO” lights when a broadcast is being received in stereo.TICAL 6CH INPUTAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIAUTO DETECT THXAUTORDSRTYMEMOSurround EXSTEREOTUNED“TUNED” is displayed when a station is received.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the MULTI CONTROL knob or use theMULTI %/fi keys to select the desired station.