Kenwood KRF-X9070D Instruction Manual

Also see for KRF-X9070D: Service manual Instruction manual Instruction manual

Contents

Kenwood KRF-X9070D Instruction Manual Manual pdf 7 page image

7 ENLSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfs DSP MODEDTSMATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CS IIA B CLIPAUTO DETECT THXAUTOMEMORYSTEREOTUNEDSWLFETHX SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMERSOUND TONE SETUPBAND AUTO MEMORYMULTI CONTROL LISTEN MODETUNERMD/TAPEVIDEO 3VIDEO 2VIDEO 1PHONOCD/DVDTHXDTSCS IIDOLBY DIGITALSPEAKER EQACTIVE EQSTANDBYON/STANDBYA SPEAKERS BPOWERPHONESDOWNMUTEAV AUXS VIDEO VIDEO L-AUDIO-RUPVOLUME CONTROLDVD/6CHSurround EXSTANDBYPOWERON/STANDBYNames and functions of parts1 POWER ON/OFF key(For KRF-X9070D) £Use to turn the main power ON/OFF.2 ON/STANDBY key(For KRF-X9070D) £Use to turn the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator2 POWER ON/STANDBY key(For VR-7080) £Use to turn the power ON/STANDBY.STANDBY indicator3 SPEAKERS keys §Use to turn the A/B speakers on or off.4 THX key fiUse to switch the status of THX.5 SPEAKER EQ key ¶Use to select SPEAKER EQ’s setting.6 Surround LED (light-emitting diode)indicatorsTHX indicator flLights when THX mode has been chosen.THX mode may or may not be activateddepending upon the applicable playbackmode.SPEAKER EQ indicator •Lights when the receiver is in the SPEAKEREQ mode.Main unit% Input Selector keys §(DVD/6CH, CD/DVD, PHONO, TUNER,VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)Use to select input sources.^ SOUND key ‡Use to adjust the sound quality and theambience effects.& BAND key ºUse to select the broadcast band.* AUTO key ºUse to select the auto or manual tuningmode.( TONE key ¶Use to switch the status of TONE control.) MEMORY key ºUse to store radio stations in the presetmemory.¡ SETUP key £Use to select the speakers' settings etc.™ ∧∧∧∧∧/∨∨∨∨∨ keys £Use for selection adjustments during sound,set up and preset channel functions.£ MULTI CONTROL knob £Use to control a variety of settings.¢ LISTEN MODE knob ‡Use to select the listening mode.∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)jacks ¡§ AV AUX key ¡Use to switch the input to AV AUX.ACTIVE EQ indicator •Lights when the receiver is in the ACTIVE EQmode.DOLBY DIGITAL indicator fiLights when the receiver is in the DolbyDigital mode.DTS indicator fiLights when the receiver is in the DTS mode.CS II indicator fiLights when the receiver is in the CIRCLESURROUND II mode.7 ACTIVE EQ key ¶Use to select ACTIVE EQ’s setting.8 DSP key fiUse to select any of the DSP mode.9 STEREO key ‡Use to switch the listen mode to STEREO.0 INPUT MODE key 0Use to switch between the full auto, digitaland analog inputs.! DIMMER keyUse to select the REC MODE. ªUse to adjust the brightness of the display.‡@ VOLUME CONTROL knob §# MUTE key ¶Use to temporarily mute the sound.$ PHONES jack •Use for headphone listening.Standby modeWhile the standby indicator is lit, a small amount of power is supplied tothe system to back up the memory. This is called standby mode. Underthe condition, the system can be turned ON by remote control unit.DisplaySpeaker selection indicatorsInput channel indicatorsOutput channel indicatorsAUTO indicatorMEMORY indicatorSTEREO indicatorTUNED indicatorFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicatorsMUTEindicatorCLIPindicatorInput modeindicatorsListen modeindicatorsCAUTIONThe power in this equipment will not be completely cut off from theAC wall outlet when the main switch is turned OFF.(For VR-7080)for KRF-X9070D