Kenwood TH-78A Instruction Manual

Also see for TH-78A: Instruction manual Instruction manual Service manual Instructions Instruction manual

Contents

Making a DTMF Call1 Hold the PTT switch down and press the MHz key.2 Press the numeric key (O-9) for the channel wherethe DTMF code is stored.3 The DTMF code appears on the display.NoteTransmission continues until the whole code stringis recalled, even if the PTT switch is released.You cannot stop DTMF code transmission once itis initiated.OPERATION AS A REPEATER(U.S.A., CANADA versions only)This transceiver is capable of operating as arepeater. The transceiver listens on both bandssimultaneously. As soon as a signal is received onone band, the other shifts from receive to transmitand re-transmits the incoming signal.Function setting1 Select the operating frequencies and adjust thesquelch controls to threshold.2 Press the F key for longer than one second and thenpress the 0 key. The MHz dot(.) will flash.To return to the normal function, perform step 2again.Notes1 The Time-out Timer function will automaticaly setto 3 minutes mode.2 Combinations of SHIFT and CTCSS can beused in the Repeater mode. DTSS andPAGING will not work in this mode.CAUTIONThis equipment can be extremely susceptibleto lightening strike damage or intermodulationdistortion if it is operated on mountain toplocations.34