Kenwood TK-5710 Series Instruction Manual

Also see for UHF P25 Transceiver TK-5810: Instruction manual Specifications Service manual Instruction manual Brochure & specs

9FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned byKENWOOD Corporation. FleetSync enables a variety of paging functions on yourtransceiver, some of which depend on dealer programming.Note: This function is available only in Conventional FM Operation.Key FuncTionSKey FunctionSelcall or Selcall + Status Press to change the transceiver mode as shown inthe diagram below.CH control Rotate to select an ID from the pre-programmed IDlist or Status list.PTT switch or PF 4 key Press to initiate a call.Keypad 0 ~ 9 Use the DTMF keypad to enter Selcall or Statusnumbers.PF 3 or DTMF # key When dialing a number manually, press to delete acharacter or press and hold to delete all characters.PF 2 or DTMF keyPress to exit Selcall or Status mode. Press andhold to toggle between list selection and manualentry (if enabled). In Stack mode, press to togglethe display between ID/message, receive channel,and time stamp, or to delete the selection.PF key Press to exit Selcall or Status mode. Depending on how your dealer programmed the transceiver, Selcall mode may be skipped or thetransceiver may exit Selcall mode automatically (as shown by the dash arrow).2 After entering Selcall mode by pressing the Selcall + Status key, you can enter Status mode bypressing the PF2 key.Selcall Mode 1Status Mode 2Stack ModeNew MessageDisplay ModeNormal Operating ModePress PF2Press Selcall or Selcall Status Receive anew messagePressany keyHold Selcall, Statusor Selcall StatusPress PF1PressPF1