Kenwood TK-5710 Series Instruction Manual

Also see for UHF P25 Transceiver TK-5810: Instruction manual Specifications Service manual Instruction manual Brochure & specs

24TRUNKING CALLSMAKing A Telephone cAll■ Manual Dialing1 Press the key programmed as Autodial.• The last called unit appears on the display.• Press the PF 2 key to switch the display between the unit name and the listnumber.2 Press and hold the PF 2 key to enter Store & Send mode.3 Enter the desired digits using the DTMF keypad.• Alternatively, you can select a digit by rotating the CH control, and then set theselected digits by pressing the GRP key. Repeat this process to enter theentire number.4 Press the PTT switch to make the call.• Alternatively, you can press the PF 4 key to page the selected unit, rather thanmaking a call.■ Selecting a Number from the List1 Press the key programmed as Autodial.• The last called unit appears on the display.• Press the PF 2 key to switch the display between the unit name and the listnumber.2 Rotate the CH control to select your desired list number.3 Press the PTT switch to make the call.• Alternatively, you can press the PF 4 key to page the selected unit, rather thanmaking a call.receiving A Telephone cAll1 When a call is received, a ringing tone will sound and “PHONE CALL” willappear on the display.2 Press and hold the PTT switch to speak, and release it to receive.• Only one person can speak at a time.MAKing A STATuS cAll1 Select your desired zone and channel.2 Press the key programmed as Status to enter status mode.3 Rotate the CH control to select the status ID you want to transmit.4 Press the PTT switch or the PF 4 key to initiate the Status call.• After the status call has been successfully received by the called unit, “COMPLETE”appears on the display.