Kenwood TK-5710 Service Manual

Also see for TK-5710(H): Instruction manual Specifications Instruction manual Instruction manual Instruction manual

20TK-5710(B)/5710H(B)DISASSEMBLY FOR REPAIRDisassembly Procedure (TK-5710 (B))■ Removing the upper/ lower case and shield cover1. Remove the 9 screws z and 9 spacers x.2. Remove the upper case c and lower case v.3. Remove the upper packing b and lower packing n.4. Remove the shield cover m.■ Removing the TX-RX unit (X57-703)1. Remove the 7 screws , holding the PLL shield cover.2. Remove the PLL shield cover ..3. Remove the coaxial cables from the two connectors(CN150, CN200) of the TX-RX unit /.4. Remove the flat cables from the two connectors (CN600,CN601) of the TX-RX unit Ω.5. Remove the 5 screws ≈.658 88 887910 1011111314 1415 1516 16 1616121212342222 222111 1 111Final unitTX-RXunitCN150CN200CN601CN600ControlunitCN702■ Removing the Final unit (X45-375)1. Remove the cables from the connector (CN702) of thecontrol unit ç.2. Remove the 2 screws √ holding the power module.3. Remove the solder of the power module with a solderabsorber.4. Remove the 2 screws ∫ holding the + (positive) terminaland - (negative) terminal of the power supply cable.5. Remove the 8 screws ~ holding the final unit.6. Remove the solder of the antenna receptacle with asolder absorber.