Kenwood TK-5710 Service Manual

Also see for TK-5710(H): Instruction manual Specifications Instruction manual Instruction manual Instruction manual

55TK-5710(B)/5710H(B)ADJUSTMENT• Test SignalingSignaling RX TX APCO/No. Analog1 None None Analog2 None 100Hz Square wave Analog3 QT 67.0Hz QT 67.0Hz Analog4 QT 151.4Hz QT 151.4Hz Analog5 QT 210.7Hz QT 210.7Hz Analog6 QT 254.1Hz QT 254.1Hz Analog7 DQT 023N DQT 023N Analog8 DQT 445N DQT 445N Analog9 DQT 754I DQT 754I Analog10 DTMF Code "159D" DTMF Code "159D" Analog11 None DTMF Code "9" Analog12 None 1633Hz Single Tone Analog13 2-tone: 2-tone: AnalogA : 304.7Hz A : 304.7HzB : 3106.0Hz B : 3106.0Hz14 Single Tone : 979.9Hz Single Tone : 979.9Hz Analog15 None MSK PN Pattern Analog16 MSK MSK AnalogSync : 0x052B Sync : 0x052BData : 0x230960C6AAAA Data : 0x230960C6AAAACRC : 0xC4D7 CRC : 0xC4D717 NAC 293 NAC 293 APCO18 NAC 023 NAC 023 APCO19 NAC 5EA NAC 5EA APCO20 1011Hz Tone Test Pattern 1011Hz Tone Test Pattern APCO21 NAC 293 Silence Pattern APCO22 NAC 293 Calibration Pattern APCO23 NAC 293 Transmitter Test Pattern APCO24 NAC 293 Symbol Rate Pattern APCO25 NAC 293 Low Deviation Pattern APCO26 NAC 293 Fidelity Pattern APCO• LED indicatorRed LED Lights during transmission.Green LED Lights when there is carrier.• LCD display in the panel test mode• Filter ModeDisplay ConditionW WIDE (25kHz) FilterN NARROW (12.5kHz) FilterA APCO (12.5kHz) Filter■ Frequency and SignalingThe transceiver has been adjusted for the frequenciesshown in the following table. When required, readjust themfollowing the adjustment procedure to obtain the frequenciesyou want in actual operation.• Test FrequencyChannel No. RX (MHz) TX (MHz)1 155.10000 155.000002 136.10000 136.000003 173.80000 173.975004 155.00000 155.000005 155.20000 155.200006 155.40000 155.400007 154.90000 154.900008 145.40000 145.400009 164.40000 164.400001 - 1Channel No. Signaling No.W : WideN : NarrowA : APCOW