Kenwood TK-5710 Service Manual

Also see for TK-5710(H): Instruction manual Specifications Instruction manual Instruction manual Instruction manual

21TK-5710(B)/5710H(B)DISASSEMBLY FOR REPAIRDisassembly Procedure (TK-5710H (B))■ Removing the upper/ lower case and shield cover1. Remove the 12 screws z and 12 spacers x.2. Remove the upper case c and lower case v.3. Remove the upper packing b and lower packing n.4. Remove the shield cover m.■ Removing the TX-RX unit (X57-703)1. Remove the 7 screws , holding the PLL shield cover.2. Remove the PLL shield cover ..3. Remove the coaxial cables from the two connectors(CN152, CN200) of the TX-RX unit /.4. Remove the flat cables from the two connectors (CN600,CN601) of the TX-RX unit Ω.5. Remove the 5 screws ≈.36588 8 8 87911111415 1516 1612121242212 21 121110101317 1717 17171717171717Final unitTX-RXunit CN152CN200CN601CN600ControlunitCN702■ Removing the Final unit (X45-376)1. Remove the cables from the connector (CN702) of thecontrol unit ç.2. Remove the 2 screws √ holding the power module.3. Remove the solder of the power module with a solderabsorber.4. Remove the 4 screws ∫ holding the two final transistors.5. Remove the 2 screws ~ holding the + (positive) terminaland - (negative) terminal of the power supply cable.6. Remove the 16 screws μ holding the final unit.7. Remove the solder of the antenna receptacle with asolder absorber.