Kenwood TK-5710 Service Manual

Also see for TK-5710(H): Instruction manual Specifications Instruction manual Instruction manual Instruction manual

7TK-5710(B)/5710H(B)REALIGNMENT8. Clone ModeProgramming data can be transferred from one trans-ceiver to another by connecting them via their microphonejacks. The operation is as follows (the transmit transceiver isthe master and the receive transceiver is a slave).The following data cannot be cloned.• Tuning data• Embedded message with password• Model name data• ESN (Electronic Serial Number) data1. Press and hold the [PF5] key while turning the transceiverpower ON. If the Read authorization password is set tothe transceiver, the transceiver displays “CLONE LOCK”.If the password is not set, the transceiver displays“CLONE MODE”.2. When you enter the correct password, and “CLONEMODE” is displayed, the transceiver can be used as thecloning master. The following describes how to enter theread authorization password.3.• How to enter the read authorization password usingthe microphone keypad;If one of keys 0 to 9 is pressed while "CLONE LOCK" isdisplayed, the pressed number is displayed on the LCD.Each press of the key shifts the display in order to the left.If you press the [#] key, the least digit of the password isdeleted.When you enter the password and press the [✳] key,“CLONE MODE” is displayed if the entered password iscorrect. If the password is incorrect, “CLONE LOCK” isredisplayed.• How to enter the read authorization password usingthe [Selector] knob;If the [Selector] knob is rotated while "CLONE LOCK" isdisplayed, the number (0 to 9) flashes on the LCD. Whenyou press the [GRP^] key, the currently selected numberis determined. If you press the [PF3] key, the least digit ofthe password is deleted. If you press the [PF2] key afterentering the password in this procedure, “CLONEMODE” is displayed if the entered password is correct. Ifthe password is incorrect, “CLONE LOCK” is redisplayed.4. Power ON the slave transceiver.5. Connect the cloning cable (part No. E30-3370-05) to themicrophone jacks on the master and slave.6. Press the [PF2] key on the master while the master dis-plays “CLONE MODE”. The data of the master is sent tothe slave. While the slave is receiving the data, “PRO-GRAM” is displayed. When cloning of data is completed,the master displays “END”, and the slave automaticallyoperates in the User mode. The slave can then be oper-ated by the same program as the master.7. The other slave can be continuously cloned. When the[PF2] key on the master is pressed while the master dis-plays “END”, the master displays “CLONE MODE”.Carry out the operation in step 4 to 6.Notes:• Cannot be cloned if the overwrite password is pro-grammed to the slave.• "Model Name and Market Code", "Head Configuration" and"Head Type" must be same to clone the transceiver. How-ever, it may be unable to clone the transceiver dependingon the enhanced features settings.(Refer to the FPU for the enhanced features details.)Fig. 2[PF5]+Power ONIs Read passwordset?“CLONE LOCK”is displayed.YesYes[PF2]NoNoEnter the password and thenpress the [PF2] key or [*] keyon the microphone.Start the clone function“CLONE MODE” is displayed.Is passwordcorrect?Cloning cable(Part No. E30-3370-05)● Flow Chart (Master transceiver)