11TRUNKING ZONESPLACING A DISPATCH C ALL1 Select the desired zone and group ID using the Zone and CH/GID keys.2 Press and hold the PTT switch.3 If the “PTT Proceed” tone sounds, communication is possible; start speakinginto the microphone. Release the PTT switch to receive.• For best sound quality at the receiving station, hold the microphone approximately1.5 inches (3 ~ 4 cm) from your mouth.• Your dealer can deactivate the PTT Proceed tone, if necessary. Ask your dealerfor details.RECEIVING A DISPATCH C ALL1 When a dispatch call is received, the transceiver will automatically change tothe correct group ID and you will hear the call.2 Readjust the volume as necessary, using the Volume keys.PLACING A TELEPHONE C ALL1 Select the desired zone and group ID using the Zone and CH/GID keys.• Alternatively, you can press the key programmed as Auto Telephone toautomatically search for a Telephone Repeater.2 Press and hold the PTT switch for approximately 1 second to ensure aconnection.• Confirm that there is a dial tone after you release the PTT switch.3 Place the call, following the instructions for making a DTMF call {page 19}.4 When the called party responds, press the PTT switch and speak into themicrophone. Release the PTT switch to receive.• Only one person can speak at a time.5 To end the call, press and hold the PTT switch, then press the DTMF # key orthe key programmed as Telephone Disconnect.RECEIVING A T ELEPHONE C ALL1 When a telephone call is received, the transceiver will automatically changeto the correct group ID and you will hear the call.• A ringer tone will sound when a call is received.2 Press and hold the PTT switch to speak, and release it to receive.• Only one person can speak at a time.3 To end the call, press and hold the PTT switch, then press the DTMF # key orthe key programmed as Telephone Disconnect.