21■ DIALING S TORED DTMF N UMBERS1 Press the key programmed as Autodial.• The first entry in the Autodial list appears on the display.2 Press the and C> keys or press the appropriate DTMF key to selectyour desired Autodial list number (01 ~ 32).• If programmed by your dealer, you can also use the and keys.• The stored entry appears on the display.3 Press the PTT switch to make the call.■ C LEARING S TORED DTMF N UMBERS1 Press the key programmed as Autodial Programming.2 Press the and C> keys, or press the appropriate DTMF key to selectyour desired Autodial list number (01 ~ 32).• If programmed by your dealer, you can also use the and keys.3 Press the A or DTMF # key.• “DELETE” appears on the display after confirming the entered number.4 Press the S or DTMF key to delete the entry from the Autodial list.• The selected memory location is cleared.REDIALYou can redial the last number you transmitted.Note: To redial a number, you must use an optional microphone with a DTMF keypad.1 Press the key programmed as Autodial.• The first entry in the Autodial list appears on the display.2 Press the DTMF key followed by the DTMF 0 key to display the last callednumber.3 Press the PTT switch to make the call.Note: Switching OFF the transceiver power clears the redial memory.CONNECT / DISCONNECT ID SNote: To transmit connect/ disconnect IDs, you must use an optional microphone with a DTMFkeypad.1 Press the key programmed as Autodial.• The first entry in the Autodial list appears on the display.2 Connect ID: Press the DTMF key two times.Disconnect ID: Press the DTMF key followed by the DTMF # key.3 Press the PTT switch to make the call.