18■ RECEIVINGThe icon will flash and a calling ID or text message will appear when aStatus call is received.Press any key to return to Normal Operation Mode.■ REVIEWING MESSAGES IN THE S TACK M EMORY1 Press and hold the key programmed as Selcall, Status, or Selcall +Status for 1 second to enter Stack Mode.• The last received message is displayed with the message number.2 Press the and C> keys to select the desired message.• If programmed by your dealer, you can also use the and keys.• Press and hold the S key to toggle between the message/ call ID and thechannel name. On TK-X180/ TK-X180H transceivers, it will also togglebetween the time of the received message.3 Press the S key to return to Normal Operation Mode.• To delete the selected message, press the A or DTMF # key. To confirm thedeletion, press the S or DTMF key.• To delete all messages, press and hold the A or DTMF # key for 1 second. Toconfirm the deletion, press the S or DTMF key.SHORT M ESSAGESTo send a short message, you must connect the transceiver to a PC. Ask yourdealer for details.• Short messages can contain a maximum of 48 characters.• Received short messages are displayed the same as Status messages and are storedin the same stack memory. A combined maximum of 15 Status calls and shortmessages can be stored in the stack memory.LONG M ESSAGESTo send and receive long messages, you must connect the transceiver to a PC.Ask your dealer for details.• Long messages can contain a maximum of 4096 characters.GPS REPORTTo send your location data, you must first install a GPS unit (NMEA-0183 format)onto the transceiver. Press the key programmed as Send the GPS data totransmit your location data. Ask your dealer for details.