16FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync is an Alphanumeric 2-way Paging Function, and is a protocol ownedby KENWOOD Corporation. FleetSync enables a variety of paging functions onyour transceiver, some of which depend on dealer programming.Your dealer can set up either FleetSync or FleetSync II (TK-X180/ TK-X180Honly) on your transceiver. Transceivers set up with FleetSync can communicatewith other transceivers that have been set up with FleetSync. Likewise,transceivers set up with FleetSync II can communicate with other transceiversset up with FleetSync II. However, transceivers set up with FleetSync cannotcommunicate with transceivers that have been set up with FleetSync II and vice-versa.SELCALL (S ELECTIVE C ALLING)A Selcall is a voice call to a particular station or to a group of stations.■ T RANSMITTING1 Select your desired zone and group (or zone and channel).2 Press the key programmed as Selcall or Selcall + Status to enter SelcallMode.3 Press the and C> keys to select the ID of the station you want to call.• If programmed by your dealer, you can also use the and keys.• If Manual Dialing is enabled, you can enter digits by using an optional DTMFkeypad or by selecting digits with the and keys. When using the andkeys, cycle through the digits to select a digit, then press the C> key toaccept the digit and shift the cursor to the right. Repeat this process until theentire ID is entered.4 Press the PTT switch and begin your conversation.• Alternatively, you can press the ■ key to page the selected station, rather thanmaking a voice call.■ RECEIVINGAn alert tone will sound, the transceiver will automatically enter Selcall Mode,and the calling station’s ID will appear when a Selcall is received.To respond to the call, press the PTT switch and speak into the microphone.