Kenwood VR-9070 Instruction Manual

Contents

20 ENSpeaker settingsTo enable you to obtain optimum enjoyment from the receiver’s listeningmodes, make sure to complete the speaker settings (Subwoofer, Front,Center, Surround and Surround Back Speakers) as described below.1Turn on the power to this receiver by pressing the (POWERON/STANDBY) key or RECEIVER ON key.2For the remote control unit, press the RCV MODE key toswitch to receiver mode.3Press the SETUP key to enter the SETUP mode.Use 5/ ∞keys or MULTI @/ #keys for the following displays.1 SP SETUP2 CROSSOVER3 TEST TONE4 BASS PEAK5 SP DISTANCE6 LFE LEVEL7 DISP MODE8 EXITThe flow of the SETUP is as follows:Display SelectorDisplay ListenBASSPEAKLFELEVELDISPMODEEXITSPSETUPSubwooferFrontCenterSurroundSurroundBackSubwooferRe-mixFront LeftCenterFront RightSurround RightSurround Back RightSurround Back LeftSurround LeftSubwooferSPDISTANCECROSSOVERFREQ:40HzFREQ:60HzFREQ:80Hz-THXFREQ:100HzFREQ:120HzFREQ:150HzTESTTONET. TONEMANUALT. TONEAUTOLCRSRSBRSLSBLSWLCRSRSBRSBLSLSW4Select a speaker system.If you have THX certified speakers, please set them to NML/THX.1 Select the SP SETUP and press the SETUP key again so thatthe Subwoofer setting indication “SUBW ON” appears.LSL SB SRC RSP MUTEA B CLIPSWLFESTEREO2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate Subwoofer setting.1 SUBW ON :Subwoofer setting mode to the receiver is ON.2 SUBW OFF :Subwoofer setting mode to the receiver is OFF.• The initial setting is “SUBW ON”.• When the setting “SUBW OFF” is selected, the Front Speakersare automatically set to “FRNT LARGE” and the procedure skipsto step 6.• When Subwoofer output sound is required, select “FRNT NML/THX”, or select both “FRNT LARGE” and “SW RE-MIX ON”.3 Press the 5 key or MULTI # key to accept the setting.• The Front Speakers setting indication “FRNT” appears.LSL SB SRC RSP MUTEA B CLIPSWLFESTEREO4 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate Front Speakers setting.1 FRNT NML/THX : Average size Front Speakers areconnected to the receiver.2 FRNT LARGE : Large size Front Speakers are connectedto the receiver.5 Press the 5 key or MULTI # key to accept the setting.• The Center Speaker setting indication “CNTR” appears.6 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate Center Speaker setting.If you selected “FRNT LARGE” as the Front Speakers setting,1 CNTR NML/THX : An average size Center Speaker is con-nected to the receiver.2 CNTR LARGE : A large size Center Speaker is connectedto the receiver.3 CNTR OFF : Center Speaker setting mode to the re-ceiver is OFF.If you selected “FRNT NML/THX” as the Front Speakerssetting,1 CNTR NML/THX : An average size Center Speaker isconnected to the receiver.2 CNTR OFF : Center Speaker setting mode to thereceiver is OFF.7 Press the 5 key or MULTI # key again to accept the setting.• The Surround Speaker indication “SURR” appears.8 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate Surround Speaker setting.If you selected “FRNT LARGE” as the Front Speaker setting,1 SURR NML/THX : Average size Surround Speakers are con-nected to the receiver.2 SURR LARGE : Large size Surround Speakers are con-nected to the receiver.3 SURR OFF : Surround Speaker setting mode to thereceiver is OFF.SETUP MULTI CONTROLRECEIVER ONMULTI %/ fi,@/#(POWERON/STANDBY)RCV MODESOUNDSOUNDSETUPPreparing for surround sound