Kenwood VR-9070 Instruction Manual

Contents

6 ENTHX DOLBY VIRTUAL STEREO INPUT MODEBASS BOOST DSP ACTIVE EQ DIMMERMULTI CONTROL LISTEN MODEINPUTSELECTORVOLUME CONTROLAV AUX/GAMESOUND TONE SETUPBAND AUTO/MONO MEMORYA SPEAKERS BPHONESTHX96kHz fsACTIVE EQDOLBY DIGITALDTSDSPS VIDEO VIDEO L-AUDIO-RLSL S SB SRC RSP MUTE6CH INPUTDIGITAL DOLBY DIGITAL EXDOLBY EXDOLBY PL II xDOLBY HDOLBY VSDTS 96/24ES MATRIX6.1ES DISCRETE6.1STEREO96kHzfsLOUDNESSNEO:6SLEEPCLIPAUTO DETECTAUTOMEMORYSTEREOTUNEDSWLFEA BTHXSurround EXDSP MODENames and functions of partsMain unit1 (POWER ON/STANDBY) key )Use to turn the power ON/STANDBY.Standby indicator2 SPEAKERS A/B keys £Use to turn the A/B speakers on or off.3 Surround LED (light-emitting diode)indicatorsTHX indicator ›Lights when the THX mode has been chosen.THX mode may or may not be activateddepending upon the applicable playbackmode.96kHz fs indicator ‡Lights when the receiver is in the 96kHzLPCM playback mode.ACTIVE EQ indicator §Lights when the receiver is in the ACTIVE EQmode.DOLBY DIGITAL indicator ‹Lights when the receiver is in the DolbyDigital mode.DTS indicator ‹Lights when the receiver is in the DTS mode.DSP indicator ›Lights when the receiver is in the DSP mode.4 INPUT SELECTOR key £Use to select input sources.5 VOLUME CONTROL knob ¢6 PHONES jack §Use for headphone listening.7 THX key ‹Use to switch the status of THX.DOLBY VIRTUAL key fiUse to select the Dolby Virtual Speaker andthe Dolby Headphone setting.STEREO key ‹Use to switch the listen mode to STEREO.INPUT MODE key 8£Use to select the Input mode.BASS BOOST key ¢Use to select BASS BOOST setting.DSP key ‹Use to select any of the DSP mode.ACTIVE EQ key ¢Use to select ACTIVE EQ setting.DIMMER keyUse to select the REC MODE. ¶Use to adjust the brightness of the display.flStandby modeWhile the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition,the system can be turned ON by remote control unit.8 SOUND key )flUse to adjust the sound quality and theambience effects.TONE key ¢Use to switch the status of TONE control.SETUP key )Use to select the speakers' settings etc.BAND key •Use to select the broadcast band.AUTO/MONO key •Use to select the auto or manual tuningmode.MEMORY key •Use to store radio stations in the presetmemory.9 5/∞ keys )Use for selection adjustments during sound,setup and preset channel functions.0 MULTI CONTROL knobUse to control a variety of settings.! LISTEN MODE knob ‹Use to select the listening mode.@ AV AUX/GAME key (£Use to switch the input to AV AUX or GAME.# AV AUX (S VIDEO, VIDEO, L-AUDIO-R)jacks (Display* Input channel indicatorsOutput channel indicatorsAUTO indicatorMEMORY indicatorSTEREO indicatorTUNED indicatorFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicatorsMUTEindicatorCLIPindicatorInput modeindicatorsListen mode indicatorsSLEEP indicator* Input channel indicatorsInput channel indicatorslight up according to theincoming audio signals."S" indicator will light upwhen the surroundcomponent of the audiosignals is only 1 channel.The figure is the view when the front cover is open.