Kenwood VR-9070 Instruction Manual

Contents

24 ENAdjusting the soundAdjusting the TONEYou can adjust the sound quality when the receiver is in the PCM stereomode, analog stereo mode and when “THX OFF”.1 For the remote control, press the RCV MODE key to switch toreceiver mode.2 Press the TONE key to select the TONE mode.3 Use the MULTI CONTROL knob or MULTI %/fi keys to selectTONE ON/OFF.LSL S SB SRC RSP MUTEA B CLIPLFESTEREO4 When in TONE ON selection, press the TONE key for the followingdisplays.BASS : Select this to adjust the low frequency range.TREBLE : Select this to adjust the high frequency range.5 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust thesound quality.LSL S SB SRC RSP MUTEA B CLIPLFESTEREO• The bass and treble levels are adjustable from -10 to +10 in 2 stepincrements.• The adjustment item is displayed for approximately 20 seconds.• This function is available only for speakers connected to FRONT Aterminals.LOUDNESSTONEVOLUMECONTROLACTIVE EQPHONES BASS BOOSTMULTI CONTROLBASS BOOSTACTIVE EQTONE MUTERCV MODEVOLUME%/fiMULTI %/ fiNormal playbackInput level adjustment (analog sources only)Input level adjustment (analog sources only)If the input level of an analog source signal is too high, the CLIP indicatorwill light up to indicate the source signal. Adjust the input level.LSL S SB SRC RSP MUTEA B CLIPLFECLIPCLIP DOLBY PL II x1 Use the INPUT SELECTOR key or Input Selector keys to select thesource of which the input level you want to adjust.• You can store a separate input level for each input source.2 For the remote control unit, press the RCV MODE key to switchto receiver mode.3 Press the SOUND and 5/∞ keys or MULTI @/# keys repeatedlyuntil the “INPUT” indication appears.4 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust theinput level.LSL S SB SRC RSP MUTEA B CLIPLFEDOLBY PL II x• The adjustment mode is displayed for approximately 20 seconds.• The input level may be adjusted to any one of three settings:0dB, -3dB, and -6dB. (The initial setting is 0dB.)5 Press the SOUND key again to return to the input indication.Input SelectorkeysINPUT SELECTORMULTI CONTROLSOUNDSOUNDMULTI %/ fi,@/#