Kenwood VR-9070 Instruction Manual

Contents

36 ENMidnight mode (Dolby Digital and DTS mode only)When watching movies at night , you might not be able to raise thevolume as loud as normal. Midnight mode compresses the dynamicrange of previously specified heavy sound passage of the Dolby Digitaland DTS sound track (like scenes with sudden increases in volume) tominimize the difference in volume between the scenes with heavysound passage and scenes with normal sound passage. This makes iteasy to hear all of the sound track, even when listening at low volumes.1 Press the SOUND key, then press the 55555/∞∞∞∞∞ keys or MULTI @/#keys until “MIDNIGHT” appears on the display.• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3is selected as the source and the listen mode is set to “DOLBYDIGITAL” or “DTS”.2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe ON or OFF setting.LSL S SB SRC RLFESP MUTEA B CLIPDIGITAL DOLBY DIGITAL STEREOAUTO DETECT• The adjustment item is displayed for approximately 20 seconds.• Some Dolby Digital or DTS software may not be compatible with theMidnight mode.3 Press the SOUND key again to return to the input indication.Panorama mode (Pro Logic IIx Music and Pro Logic IIMusicmode only)When listening to music, you will be able to enjoy the “wraparound”sound effect when you adjust the panorama mode.1 Press the SOUND key, then press the 55555/∞∞∞∞∞ keys or MULTI @/#keys until “PANORAMA” appears on the display.2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectPANORAMA ON or OFF.1 PANORAMA ON : PANORAMA mode is ON.2 PANORAMA OFF : PANORAMA mode is OFF.LS SBRLFESP MUTEA B CLIP DOLBY PL II xSTEREOAUTO DETECT3 Press the SOUND key again to return to the input indication.Adjusting the soundYou can make further adjustments to the sound while listening toplayback in the surround mode.STEREOSOUNDSLEEPDIMMERLISTEN MODE%/ fiMULTI %/ fi,@/#DIMMER SOUND LISTEN MODEMULTI CONTROLSTEREO1 For the remote control, press the RCV MODE key to switch toreceiver mode.2 Press the SOUND key and then use the 55555/∞∞∞∞∞ keys or MULTI @/#keys until the desired item appears in the display.Each time you press the 55555/∞∞∞∞∞ keys or MULTI @/# keys, the menuchanges as follows:Note that some items are not displayed in certain modes.1 CNTR (Center Speaker level adjustment)*2 SR (Right Surround Speaker level adjustment)*3 SB (Surround Back Speaker level adjustment)*4 SBR (Surround Back Right Speaker level adjustment)*5 SBL (Surround Back Left Speaker level adjustment)*6 SL (Left Surround Speaker level adjustment)*7 SUBW (Subwoofer level adjustment)*8 INPUT (Input level adjustment - analog mode only) ¢9 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTS modeonly)0 PANORAMA (Panorama mode ON/OFF )**- DIMENSION (Dimension adjustment)**= CENTER WIDTH (Center width adjustment)**~ CENTER IMAGE (Center image adjustment - Neo:6 Musicmode only)! DUAL MONO (Dual Mono selection - Dolby Digital mode only)* The adjustment is only temporary for the current input selection.The value will return automatically to the original setup value whenthe power is turned on/off.** Pro Logic IIx Music and Pro Logic II Music mode only.• If you have selected “SB NML/THXx1” or “SB LARGEx1”, “SBR”and “SBL” are not appeared but “SB” is appeared on the Display.3 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust thesetting as desired.• The adjustment item is displayed for approximately 20 seconds.4 Press the SOUND key again to return to the input indication.Convenient functions