Kenwood VR-9070 Instruction Manual

Contents

28 ENListening to radio broadcastsThe receiver can store up to 40 stations in the memory and recall themby one-touch operation.Tuning radio stations1Use the INPUT SELECTOR key or TUNER key to select thetuner.2Use the BAND key to select the desired broadcast band.Each press switches the band.LSL S SB SRC RLFESP MUTEA B CLIPSTEREOAUTO3Use the AUTO/MONO key to select the desired tuning method.Each press switches the tuning method to either auto or manualtuning.“AUTO” indicator lights up in the display.RDSRTYSTEREOAUTO• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4Use the MULTI CONTROL knob or MULTI %/ fikeys, orTUNING 1/ ¡keys to select the station.“STEREO” lights when a broadcast is being received in stereo.AUTOMEMOSTEREOTUNEDSTEREO“TUNED” is displayed when a station is received.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob or use the MULTI %/fi keys toselect the desired station.MULTI CONTROLINPUT SELECTORBANDAUTO/MONOAUTO/MONOTUNING 1/¡TUNERBANDMULTI %/ fiPresetting radio stations manuallyMULTI CONTROLMEMORYInput SelectorkeysINPUT SELECTORMULTI %/ fi1Tune to the station you want to store.2Press the MEMORY key while receiving the station.Blinks for 20 seconds Lights for 20 secondsLSL S SB SRC RLFESP MUTEA B CLIPSTEREOAUTOMEMORYSTEREOTUNEDMEMORYProceed to step 3 within 20 seconds.(If more than 20 seconds elapse, press the MEMORY key again).3Use the MULTI CONTROL knob or MULTI %/ fikeys to selectone of the station presets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3 and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.