Command Quick ReferenceSome [optional] commands have been included for clarity. All settings commands have acorresponding query. See the Syntax Conventions for SCPI.ABORT:ACQuire Cancels any triggered measurements.:ELOG Stops external data logging.:TRANsient Cancels any triggered actions.CALibrate:COUNt? Returns the number of times the unit has been calibrated.:CURRent[:LEVel] <value> Calibrates the current programming and measurement.:SHARing Calibrates the Imon signal for paralleled units. (RP795xA, N676xA):TC Calibrates the temperature coefficient. (RP793xA, RP794xA):DATA <value> Enters the calibration value read by the external meter.:DATE <"date"> Enters the calibration date in nonvolatile memory.:LEVel P1|P2|P3 Advances to the next level in the calibration.:PASSword <value> Sets a numeric password to prevent unauthorized calibration.:RESistance:BOUT Calibrates the bottom out resistance. RP795xA, RP796xA):SAVE Saves the calibration constants in non-volatile memory.:STATe 0|OFF|1|ON Enables or disables calibration mode.:VOLTage[:LEVel] <value> Calibrates the local voltage programming and measurement.DISPlay[:WINDow][:STATe] 0|OFF|1|ON Turns the front panel display on or off.:VIEW METER_VI|METER_VP|METER_VIP Selects the parameters to display on the front panel.:SAVer[:STATe] 0|OFF|1|ON Turns the front panel screen saver on or off.FETCh[:SCALar]:CURRent[:DC]? [<start_index>, <points>] Returns the averaged measurement.:ACDC? Returns the RMS measurement (AC + DC).:HIGH? Returns the High level of a pulse waveform.:LOW? Returns the Low level of a pulse waveform.:MAXimum? Returns the maximum or minimum value.:MINimum?:POWer[:DC]? [<start_index>, <points>] Returns the averaged measurement.1 Quick Reference24 Keysight RP7900 Series Operating and Service Guide
