Rack MountingThis section contains information for installing an RP7909A Rack Mount Kit. The rack mount kit allowsthe RPS units to be mounted in a 19-inch EIA rack cabinet.Before getting started, check the following list and verify that you have received these items. Ifanything is missing, please contact your nearest Keysight Sales and Support Office.Rack Mount Kit Contents Keysight Part numberSlide rails, 2 pair (includes mounting hardware) 5003-1128Rack Flange kit without handles - includes: 5067-6705Flange mount, qty 2 5022-9638Flange attachment screws, qty 6 (M4x0.7 10mm) 0515-1114Front dress screws, qty 4 (10-32 x 0.625) 3030-1768Metal clip-nuts, qty 4 (10-32 x 0.5) 0590-0804Installing the InstrumentKeysight RP7900A series power supplies weigh as much as 70 lbs. (31.8 kg). Twopeople are required for installation. Do not lift or move the unit alone. Avoid moving theunit by hand. If unavoidable, lift only the unit’s chassis; do not lift the unit using theoutput terminals.Do not block the air intake at the front, or the exhaust at the rear of the instrument.Tools required: Phillips driver, T22 Torx driver, T10 Torx driver.1. Remove the four feet from the bottom of the instrument.2. Install the ESD cover flange to the side of the instrument using the two screws provided. Theflange and the screws (0515-1946) are provided in the Cover Kit (5066-1930) that is shipped withthe instrument.3. Install the slide rails 5003-1128. Refer to the slide rail instructions.a. Install the movable part of each slide rail to the sides of the instrument using the four screwsprovided (0515-1013).b. Install four clip-nuts on the rack frame where your instrument will be located. Install one clipnut on each corner (0590-0804).c. Install the stationary part of each slide rail to the sides of the rack frame using the four screwsprovided (2680-0104).4. Install the two flange mounts to the front panel corners of the instrument using the six screwsprovided (0515-1114).2 Installing the Instrument64 Keysight RP7900 Series Operating and Service Guide
