Specifications and Characteristics - RP793xA, RP794xASpecifications - RP793xA, RP794xASupplemental Characteristics - RP793xA, RP794xACommon CharacteristicsOutput Impedance GraphsInductive Load Boundary for Current Priority ModeCapacitive Load Boundary for Voltage Priority ModeMeasurement Accuracy and ResolutionExcessive Dynamic ProtectionOutput QuadrantsDimensionsSpecifications - RP793xA, RP794xAUnless otherwise noted, specifications are warranted over the ambient temperature range of 0 to40°C after a 30-minute warm-up period. Specifications apply at the output terminals, with the senseterminals connected to the output terminals (local sensing).Specification RP7931A,RP7941ARP7932A,RP7942ARP7933A,RP7943ARP7935A,RP7945ARP7936A,RP7946ADC RatingsVoltage source:Current source and sink:Power:0 to 20 V0 to ±400 A0 to ±5 kW0 to 80 V0 to ±125 A0 to ±5 kW0 to 20 V0 to ±800 A0 to ±10 kW0 to 80 V0 to ±250 A0 to ±10 kW0 to 160 V0 to ±125 A0 to ±10 kWOutput ripple & noiseCV peak-to-peak:1CV rms:230 mV3 mV80 mV8 mV30 mV3 mV80 mV8 mV200 mV20 mVLoad regulationVoltage:Current:1 mV25 mA3 mV13 mA1 mV50 mA3 mV25 mA6 mV13 mAVoltage programming &measurement accuracy3 0.02% + 2 mV 0.02% + 8 mV 0.02% + 2 mV 0.02% + 8 mV 0.02% + 16 mVCurrent programming &measurement accuracy:3 0.04% + 45 mA 0.03% + 13 mA 0.04% + 90 mA 0.03% + 25 mA 0.03% + 13 mATransient response4Recovery Time:Settling band:300 μs0.2 V300 μs0.8 V300 μs0.2 V300 μs0.8 V300 μs1.6 V1 From 20 Hz to 20 MHz (-3dB bandwidth) with resistive load, terminals ungrounded, or either terminal grounded2 From 20 Hz to 10 MHz (-3dB bandwidth) with resistive load, terminals ungrounded, or either terminal grounded3 Percent of value + offset; at 25°C ±5°C after a 30 minute warm-up; measurement NPLC=1; valid for 1 year, see Calibration Interval;with a load lead voltage drop of up to 1V per lead - see Wire Size for additional information about load lead voltage drop4 Time to recover to within the settling band following a step change from 40% to 90% of full load with a 35 μs current rise timeKeysight RP7900 Series Operating and Service Guide 351 Quick Reference
