Before Installation or UseInspect the UnitWhen you receive your RPS unit, inspect it for any obvious damage that may have occurred duringshipment. If there is damage, notify the shipping carrier and nearest Keysight Sales and Support Officeimmediately. Refer to www.keysight.com/find/assist. Until you have checked out the unit, save theshipping carton and packing materials in case the unit has to be returned.Check for Items SuppliedBefore getting started, check the following list and verify that you have received these items. Ifanything is missing, please contact your nearest Keysight Sales and Support Office.RP7900A Items Description Part NumberRemote sense cable forRP795xA. RP796xA (installed)High voltage cable with 2-pin connector for + and - sense Keysight 5188-9516Plug only: Phoenix Contact 1714278Remote sense cable forRP793xA. RP794xA (installed)Sense cable with 2-pin connector for + and - sense Keysight 5190-4501Plug only: Phoenix Contact 1952267Digital connector plug* 8-pin connector for the digital port Keysight 1253-6408;Phoenix Contact 1840421Master/slave cable* 1 m cable (CAT6A) for master/slave communication Keysight 8121-2314Input safety cover with bushing* Safety cover for AC input with strain relief bushing Cover only: Keysight 5066-1925Bushing only: Keysight 1410-1901Output safety cover* Safety cover for high voltage output bus barsSafety cover for high current output bus barsKeysight 5066-1927Keysight 5188-9544Sharing connector cable*RP795xA. RP796xA onlyHigh-voltage cable with 3-pin connectors for the sharingportKeysight 5188-9517Plug only: Keysight 0360-3038;Phoenix Contact 1840379Control safety cover*RP795xA. RP796xA onlySafety cover for current-sharing cable Keysight 5066-1926Ferrite core*RP795xA. RP796xA onlyFerrite core installs on the current sharing cable Keysight 9170-2573ESD cover with flange* ESD cover for remote interface connections Keysight 5003-2364 - coverKeysight 0515-1946 - screwsHardware KitsRP795xA. RP796xARP793xA. RP794xANuts and bolts for + and - high voltage bus barsNuts and bolts for + and - high current bus barsKeysight 5067-6031Keysight 5066-1936Ferrite core for power cord For earlier models RP7961A, RP7962A, RP7963A Keysight 9170-2578Calibration certificate Calibration certificate referenced to serial number None* Parts marked with an asterisk are included in Cover KIt, p/n 5066-1930.2 Installing the Instrument62 Keysight RP7900 Series Operating and Service Guide
