Keysight Technologies X Series User Manual

Also see for X Series: Installation note Measurement guide Installation note Security Features and Document of Volatility Service guide

Contents

Keysight Technologies X Series User Manual Manual pdf 298 page image

280 Keysight EXG and MXG X-Series Signal Generators User’s GuideUsing Custom Digital Modulation for N5172B/82B with Option 431 and 653/655/656/657Using the Arbitrary Waveform GeneratorFigure 9-20 Storing a Custom Digital Modulation State1. Return to the top–level ARB Custom Modulation menu, where Digital Modulation Off On is thefirst softkey.2. In the ARB Custom Modulation menu (page 280), press Single Carrier Setup > Store CustomDig Mod State > Store To File.If there is already a file name from the Catalog of DMOD Files occupying the active entryarea, press the following key: Clear Text3. Enter a file name (for example, NADCQPSK) using the alpha keys and the numeric keypad with amaximum length of 23 characters.4. Press Enter.The user–defined, single–carrier, digital modulation state is now stored in non–volatile memory.Recalling a Custom Digital Modulation StateUsing this procedure, you will learn how to recall a custom digital modulation state from signalnon–volatile memory.The RF output amplitude, frequency, and operating state settings are notstored as part of a user–defined, digital modulation state file.Catalog displays DMOD files that havebeen previously saved by the user.Mode > ARB Custom Modulation > SingleCarrier Setuppage 57These keys manage the tableof DMOD files in internalstorage.For details on each key, use key help as described on page 56.