434 Keysight EXG and MXG X-Series Signal Generators User’s GuideUsing the N5102A Digital Signal Interface Module for N5172B/82B with Option 003/004 and653/655/656/657Operating the N5102A Module in Output ModeOperating the N5102A Module in Output ModeThis section shows how to set the parameters for the N5102A module using the signal generator UIin the output direction. Each procedure contains a figure that shows the softkey menu structure forthe interface module function being performed.Setting up the Signal Generator Baseband DataThe digital signal interface module receives data from a baseband source and outputs a digital IQor digital IF signal relative to the selected logic type. Because a signal generator provides thebaseband data, the first procedure in operating the interface module is configuring the signalgenerator using one of the real-time or ARB modulation formats, or playing back a stored file usingthe Dual ARB player. For information on configuring the signal generator, refer to Chapter 8, “BasicDigital Operation for N5172B/82B with Options 653/655/656/657”, on page 151.1. Preset the signal generator.2. Select the modulation format (GSM, Custom, and so forth) and set the desired parameters.3. Turn-on the modulation format.Accessing the N5102A Module User InterfaceFigure 17-9 shows the Auxiliary menu that is accessed by pressing the Aux Fctn key on the frontpanel of the signal generator.Figure 17-9 First-Level Softkey MenuSelect either PXB or N5102Aconnectivity.The default selection is N5102A.Aux FctnPress here to access the N5102Amenu.
