Keysight EXG and MXG X-Series Signal Generators User’s Guide 77Front Panel Operation for All ModelsWorking with Files (Viewing/Storing/Loading/Moving)Loading (Recalling) a Stored FileThere are several ways to load (recall) a stored file.— For an instrument state file, use the Recall key shown in Figure 4-9 on page 79.— For other types of data, use the Load/Store softkey (shown below) that is available through themenu used to create the file.Loading a File From USB MediaTo load a file from USB media, use the USB file manager shown below.File TypeListStateWaveformUser FlatnessUser PresetPulse TrainRecall FromSweep menuSave menuMode menuAmplitude menuUser Preset menuPulse Train menuThis key changes, dependingon the selected file.If the signal generator does not recognize the file,you must select how the file is to be used.File TypeListStateWaveformUser FlatnessUser PresetLicensePulse TrainExtension.list.state.waveform.uflat.uprst.lic.ptrainPressing Select with file highlighted...loads list and starts sweepload instrument stateloads and plays waveformloads and applies user flatnessloads and executes user presetinstalls purchased licenseloads and applies pulse trainFor details on each key, use key help as described on page 56.Copy & Select User FlatnessCopy & Play WaveformCopy & Play SequenceEnter DirectoryRecall Instrument StateLoad ListLoad Pulse TrainInstall licensesNo action (USB disconnected)Use AsFile > Catalog Type > <type> > More > USB File ManagerorFile > More > USB File ManagerorInsert the USB media
