manuals
database
Your AI-powered manual search engine
Search
Home
Brands
L3 comminications
Sonar
SERIES 5000
L3 comminications SERIES 5000 Operation And Maintenance Manual
Print this manual
Download
L3 comminications SERIES 5000 Operation And Maintenance Manual
Table of content
Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Series 5000 Sonar System Operations and Maintenance Manual P/N 11210060, Rev
APPENDIX A: Sample Towing Characteristics
Equipment
Computer Display and Control Unit
Subsurface Equipment
Theory of Operation
Towfish
Table 1-1: Towfish Connector—at Towfish
Transceiver and Processing Unit
Figure 1-7: AC Connector
Sonar System
Sonar Transceiver and Processing Unit (TPU)
RS-232 COM 2 Port
Transmitter
Heading Sensor
Steel Tow Cable
Unpacking and Inspection
Unpacking the Towfish
Power Connection
Power Line Fuse
Grounding
Tow Cable Electrical Connection
Towfish and Optional Depressor Connection
Tow Cable Disconnection
Quick Start Installation and Operating Guide
Deck Test
At-Sea Test
Installing SonarPro
SonarPro Quick Start
SonarPro Windows
Selecting the Connection Type
Operating in Real Time
Survey Wizard
Series 5000 Sonar System Towfish Setup
Control Tab
System—Towfish Diagnostics Tab
Monitoring and Setting the Information Alarms
Roll Alarm
Recording Sonar Data
Editing Pre-Recorded Data
Selecting a New File
Configuration Tab
Tracker Tab
Opening Additional Sonar Viewer Windows
Navigation Window
Setting up the Navigation Window Properties
Using the Navigation Window Tool Bar
Managing C-MAP Charts
Managing C-MAP Licenses
Managing Maptech Charts
Displaying Outlines
D Terrain Window
Targets And Target Management
Using the Target Window Tool Bar
Managing Targets
Target Measurement
Setting up the User Preferences
Setting up the General User Preferences
Setting up the Compass Preferences
Setting up the Target Preferences
Arranging Windows
Survey Routes
Setting up a Survey Route
Layback
Figure 4-72: The Cable Out Dialog Box
Towfish Depth
Printing with SonarPro
Operating SonarPro With Dual Displays
between Them
Windows (Bottom)
Raw Channel Data
Operating the Wing
Selecting the Emergency Activation COM Port
Depth and Altitude Displays
Operating SonarPro with a Series 3000 Sonar System
Palette Control Tab
Figure 4-92: The Sub Bottom Profiler Scan Window
Series 3000 Sonar System Towfish Setup
Notes on Time Usage
IRIG
CHAPTER 5: Equipment Maintenance
Weekly Maintenance Checklist
Replacing the Fixed Tail Cone Assembly
Figure 5-5: Tail Cone Being Tightened With Screwdriver and Key
Removing the Fixed Tail Cone Assembly
CHAPTER 6: Splashproof TPU
Venting the Splashproof TPU
general description
Operator Controls and Indicators
Figure 6-5: Front Panel of VME Chassis inside Splashproof TPU
Functional Components
Setting up and Connecting the Splashproof TPU
Activating the Splashproof TPU
Specifications
Figure A-1: Cable Length vs. Towfish Depth Graph 1
Figure A-2: Cable Length vs. Towfish Depth Graph 2
Figure A-3: Cable Length vs. Towfish Depth Graph 3
Figure A-4: Cable Length vs. Towfish Depth Graph 4
Figure A-5: Cable Length vs. Towfish Depth Graph 5
B.1 Unreeling Tow Cable
B.2 Uncoiling Tow Cable
B.3.2 Effect of Cable Kinking
C.1 Control Methods
C.3 Remote Control
C.4 Snapshots
C.5 Messages
C.5.2 Heartbeat Message
C.6 Towfish Commands
C.6.2 5000 System Transmitter Commands
C.6.3 System 5000 Actuator Commands
C.6.6 System 5900 MUX Commands
C.6.7 System 5900 DSP Commands
C.6.9 System x000 Sub-Bottom Profiler (SBP) Commands
C.6.10 Datalogger On/Off commands
and Troubleshooting
D.1 Basic System Requirements
D.3 Installing SonarPro
D.4.2 Windows 2000 LAN Configuration Setup
D.4.3 Windows XP LAN Configuration Setup
D.5 TPU LAN Configuration Setup
D.6 Different Cable Lengths and the Startup.ini File
D.6.1 Tow Cable Considerations
D.6.2 Measuring Cable Insertion Loss
D.6.3 Spare Tow Cable
D.7.1 Input Power
D.7.2 Towfish Fuse
D.7.5 Power Supplies
D.7.6 TPU Power up and Test Sequence
D.8 Towfish
D.8.1 Testing the Towfish
D.8.3 Checking the Transmitters before Deployment
Trouble Shooting Chart
D.8.6 Towfish Bottle Electronics
Figure D-19: Towfish Electronics
D.8.8 Towfish Telemetry
D.8.10 Checking the Multiplexer Board
D.8.11 Checking the Transmitter Board
D.8.13 Checking the DSP Board
D.8.14 Checking the Sensors
D.8.15 Calibrating the Optional Temperature Probe
D.8.17 Calibrating the Compass
D.8.18 Series 5000 Sonar System Towfish Commands
D.9 Software Troubleshooting
D.11 Problem Troubleshooting
D.11.1 Recommended Test Equipment
D.11.2 Spare Boards and Components
D.12 Cable Pinouts
D.13 NMEA 0183 Formats and Information
Towfish
D-45
With the towfish electronics out of the pressure housing you can identify some of
the components as shown in Figure D-19.
Figure D-19:
Towfish Electronics
Previous
Next
/ 283
Zoom view
This manual is suitable for:
SERIES 5000
manuals
database
Your AI-powered manual search engine
