Survey Wizard 4-74.6 Survey WizardSurvey WizardClick this button to start the Survey Wizard. The Survey Wizard dialog box willopen to the Start page as shown in Figure 4-7.The Survey Wizard will guide you through the following parameters:• First enter a name for the current survey.• Select a data directory.• Specify a target catalog.• Specify target parameters.• Specify a survey grid waypoint file.• Specify a session state file.• Specify the sensor scale of the towfish being used.Once the above has been checked or set up, click Finish. You will then have anopportunity to print a summary of the setup information using the Snagit printutility (check print preview).On the Start page of the Survey Wizard, you are asked to enter a name for thesurvey. This action gives the main folder a name in which to store the sonar datafiles and sub folders, in this case Survey002, the default, as shown in Figure 4-8.Figure 4-7: The Survey Wizard Dialog Box—Start Page
