Echo Liquid Handler Software 5-235.2.2 Plate specification editorSource plates require very exacting specifications to accurately transfernanoliter volumes; therefore, they are defined specifically for the Echoinstruments and tested at Labcyte (Echo-qualified). For this reason, newsource plates cannot be defined by the user. For existing source plates, onlythe barcode location can be edited (see Figure 5.25). Contact Labcyte toadd more source plates. See “Contact information” on page 7-1.Note: In Echo application software, such as Echo Dose-Response andEcho Cherry Pick, (version 1.5 or later), existing source plates can becopied and renamed, to allow for more specific identification forapplication workflows, and then imported into Echo software.However, other plate parameters still cannot be changed--except forbarcode location.Figure 5.25 Plate Specification for Source PlateSource plate specifications cannot be removed from the Echo liquid handlersoftwareor the PLATE NAME LIST. All source plate specifications can be usedas destination plate specifications; however, no user-defined destinationplate specification can be used as a source plate specification.
