B-2 Echo Liquid Handler User ManualB.1 Short flange height microplatesLeft side: The barcode label may extend the full width of the microplateflat surface. Its bottom edge may be no lower than either ≥1.0 mm abovethe top of the skirt or ≥3.0 mm above the bottom of the skirt. Refer toFigure B.1.Front side: Same as the left side.Right side: The right side of a microplate cannot be used for a barcodelabel.Back side: The back side of a microplate cannot be used for a barcodelabel.Figure B.1 Short flange height barcode locations and obstructed regionsB.2 Medium flange height microplatesLeft side: Both source and destination microplates are obstructed on theirleft sides. The 1.52 cm (0.6 in) obstructed area is shown in Figure B.2.Front side: There is no obstruction on the front side of either source ordestination microplates.Right side: The right side of a microplate cannot be used for a barcodelabel.Back side: The back side of a microplate cannot be used for a barcodelabel.Figure B.2 Medium flange height barcode locations and obstructed regions
