Magnavox 20MC4204/17 Owner's Manual

Also see for 20MC4204 - Tv/dvd Combination: User manual Quick use guide User manual Specifications

First-Time Setup, Watching TV 11These SET UP screens will appear the first time you turn onthe TV/DVD. Set the language for the menus and have theunit memorize available TV channels.If you are using a Cable Box or Satellite Receiver, do not setchannels at the TV/DVD. Set it to the output channel of theCable Box/Satellite Receiver (channel 3, 4, or AUX). Selectchannels at the Cable Box/Satellite Receiver. See page eight.1 Press STANDBY-ON to turn on the TV/DVD.2 Press ENTER repeatedly to select ENGLISH,ESPAÑOL, or FRANÇAIS. The selected languagewill appear inside the [ ].This will be the language ofthe TV/DVD menus.3 Press ▲ or ▼ to select AUTO PRESET.Thenpress ENTER. The menu will disappear and theTV/DVD will start scanning channels. Active channelswill be memorized during this process.When scanning is complete, the TV/DVD will go tothe lowest available channel automatically.4 To watch TV, press the CH. ▲ or ▼ buttons toselect memorized channels.These appear automaticallywhen you flip through channels. If a channel is skipped,use the Number buttons to select it.This is a non-memorized channel; it may have weak reception inyour area.Remember, if you are using a Cable Box/SatelliteReceiver, set the TV/DVD to channel 3 or 4 or AUX.Change channels at the Cable Box/Satellite Receiver.5 Press VOL. ▲ or ▼ to adjust the volume.• If the power fails, you may needto repeat this first-time setup.• You may not see these menuswhen you turn on the TV/DVD.Set channels and the menu lan-guage later. See page 17.• To select Cable TV channelsabove 99, press the +100/+10button, then press the Numberbuttons for the last two digits.For example, to select channel125, press +100/+10, 2, 5.Precede single-digit channel num-bers with a zero (for example,01 ... 09).• Pressing CH. ▲ or ▼ in DVDmode puts the unit in TV mode.• If you turn off the unit in DVDmode, when you turn it on again,it will be in TV mode.• To remove the SET UP menu orstop scanning channels, pressSETUP on the remote.2-31 45Helpful Hints– SET UP –LANGUAGE[ENGLISH] ESP FRAAUTO PRESETB– SET UP –LANGUAGE[ENGLISH] ESP FRAAUTO PRESETBVOLUME 2020MC4204 04.2.25 9:33 PM Page 11