16ENPREPARATION[PC Connection]This unit can be connected to your PC that has a DVI terminal.Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug-RCA conversion cable as well.If you connect this unit to your PC, you can use this unit as a PC monitor.DVI OUTThe following signals can be displayed:Format Resolution Refresh rate Format Resolution Refresh rateVGA 640 x 480 60HzWXGA1,280 x 768 60HzSVGA 800 x 600 60Hz1,360 x 768 60HzXGA 1,024 x 768 60HzOther formats or non-standard signals will not be displayed correctly.Note:• Please purchase the HDMI-DVI conversion cable that has a ferrite core.• The following operations may reduce noise.- Attach a ferrite core to the AC power cord of your PC.- Unplug the AC power cord and use the built-in battery of your PC.No supplied cables are used in this connection:Please purchase the necessary cables at your local store. Cable ManagementKeep the cables through this holder to avoid tanglethem. Plug In the AC Power CordMake sure that the AC power cord must be pluggedto an AC outlet after all the necessary connections arecompleted.Caution:• Do not connect the AC power cord to a power supply outsidethe indicated voltage of this unit (AC 120V).Connecting the AC power cord to a power supply outside ofthis range may result in fire or electrical shocks.Note:• Each time you plugged in the AC power cord, any operationswill not be performed for a few seconds.This is not a malfunction.stereo mini plug-RCAconversion cableHDMI-DVIHDMI-DVIconversion cableconversion cablerear of this unitTo HDMI1To HDMI1Input jack onlyInput jack onlyHDMI-DVI conversion cableshould be with ferrite core.e.g.)personal computerrear of this unitAC power cordAC outletrear of this unit
