Magnavox 37MD359B User Manual

Also see for 37MD359B: Quick start guide Specifications User manual User manual

Contents

45ENINTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATIONStereo Sound ModeStereo Sound ModeCDThis unit allows you to select a sound mode during CD playback.During playback, press [SAP/AUDIO] repeatedly untilthe desired sound mode appears.STEREO• Each time you press [SAP/AUDIO], the sound modechanges as example below.STEREO (stereo sound with left andright channels)L-ch (left channel sound only)R-ch (right channel sound only)Note:• Virtual surround cannot be changed when the sound modeis set to either “L-ch” or “R-ch”.Virtual SurroundVirtual SurroundYou can enjoy virtual surround on your 2 channel stereo system.1 During playback, press [MODE] repeatedly until “ ”appears.OFF (SURROUND)2 Press [Cursor K / L] to select the sound level.1 (SURROUND)1 : Natural effect.2 : Emphasized effect.OFF : No effects (original sound).3 Press [BACK] to exit.Note:• The setting will be kept even if the unit is turned off.• For audio CD, virtual surround will not be effective if thesound mode is set to something other than “STEREO”.(Refer to “Stereo Sound Mode” on page 45.)• Turn down the level or select “OFF” if the sound is distorted.Marker SetupMarker SetupThis feature allows you to assign a specific point on a disc to be called back later.To set a marker1 During playback, press [MODE] repeatedly until“ ” / “ ” appears.e.g.) DVD_ _ /12 (SEARCH)2 Use [Cursor K /L] repeatedly until marker search menuappears.1 2 3 4 5 6 7 8 9 10 AC3 Use [Cursor s / B] to select an available marker within60 seconds.1 2 3 4 5 6 7 8 9 10 AC4 When the playback reaches the point at which youwant to set a marker, press [OK].• Marker is now set.2 3 4 5 6 7 8 9 10 AC5 Press [BACK] to exit.To return to the marker later1 Repeat steps 1-2 in “To set a marker”. Use [Cursor s / B]to select the desired marker.e.g.) DVD2 3 4 5 6 7 8 9 10 AC2 Press [OK] at the desired marker to restart playbackfrom the specific point which you set.2 3 4 5 6 7 8 9 10 ACNote:• Marker search menu will disappear in about 60 secondswhen there is no input.• You can mark up to 10 points.• To clear a marker, select the marker to be cleared, and thenpress [CLEAR].• Ejecting the disc or turning off the power will erase allmarkers.• Selecting “ ” at step 3 in the section “To set a marker” willalso erase all markers.