D VD SETTING48EN Parental SettingParental setting prevents your children from viewing inappropriatematerials. (password protected.) Playback will stop if the ratings exceedthe levels you set.1 Press [MENU] to display the main menu.PICTURESOUNDSETUPFEATURESLANGUAGEDVDTintShar pnessBrightnessContrastColor00306036Color TemperatureSmar t PictureNormalPersonal2 Use [Cursor K / L] to select “DVD”, then press [OK].PICTURESOUNDSETUPFEATURESLANGUAGEDVDPress “OK” key to move to DVD setup.3 Use [Cursor s / B] to select “ ”, then press [OK].PARENTALENTER/OKPARENTAL LEVEL ALL4 Use [the Number buttons] to enter the 4-digitnumbers for your password, then press [OK].PARENTALENTER/OKEnter current password.• If you have set password already, use[the Number buttons] to enter the current 4-digitpassword.• You cannot use the default password (4737) to play backa DVD.5 Use [Cursor K / L] to select the “PARENTAL LEVEL”, thenpress [OK].PARENTALENTER/OKPARENTAL LEVEL ALLPASSWORD CHANGE6 Use [Cursor K / L] to select the desired item, then press[OK].PARENTALENTER/OKALL8 [ ADULT ]7 [ NC-17 ]6 [ R ]5 [ PGR ]4 [ PG13 ]3 [ PG ]PARENTAL LEVELPARENTAL LEVELALL : All parental locks are cancelled.8 [ADULT] : All ratings (adult / general / children)can be played back.7 [NC-17]-2 [G] : Only DVD intended for general useand children can be played back.1 [KID SAFE] : Only DVD intended for children canbe played back.7 Press [MENU] to exit.To change the password5 Follow steps 1 to 4. Use [Cursor K / L] to select“PASSWORD CHANGE”, then press [OK].PARENTALENTER/OKPARENTAL LEVEL ALLPASSWORD CHANGE6 Use [the Number buttons] to enter the new 4-digitpassword.PARENTALENTER/OKPASSWORDPlease enter a 4-digit password.0 0 0 0Don’t forget the password.Press ‘ENTER/OK’ to activate password.Note:• DVD-video may not respond to parental lock settings. Makesure this function works with your DVD-video.• Record the password in case you forget it.• If you forget the password, press [4], [7], [3], [7], then enteryour new password. Password will be cleared and parentallevels will be set to “ALL”.• A power failure will not erase your password.7 Press [MENU] to exit.