23ENINTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION Channel ListThe channels selected here can be skipped when selecting the channelsusing [CH + / -].Those channels can still be selected with [the Number buttons].1 Press [MENU] to display the main menu.2 Use [Cursor K / L] to select “SETUP”, then press [OK].Channel ListAdd ChannelsAntennaAutoprogramPICTURESOUNDFEATURESLANGUAGEDVDSETUP3 Use [Cursor K / L] to select “Channel List”, then press[OK].PICTURESOUNDFEATURESLANGUAGEDVDSETUPChannel ListAdd ChannelsAntennaAutoprogram4 Use [Cursor K / L] to select the channel you want toremove, then press [OK].Ch Select Watch/Skip BackBACKOKHighlight channels for Ch Up/Down keyselection.11.211.3DTVDTVPICTURESOUNDFEATURESLANGUAGEDVDSETUPDTV 11.1• The channel display for the removed channeldarkens. You will not be able to select the channelagain using [CH + / -].• To reactivate a removed channel, use [Cursor K/L] andpress [OK]. The registered channels are highlighted.• When you remove a main channel, its subchannelsare removed as well.Note:• The channel with the “DTV” indicated on the display isATSC. Otherwise the channel is NTSC.5 Press [MENU] to exit. Add ChannelsThis function lets you add the channels that were not added by theautoprogram due to the receptible condition at the initial setting.1 Press [MENU] to display the main menu.2 Use [Cursor K / L] to select “SETUP”, then press [OK].Channel ListAdd ChannelsAntennaAutoprogramPICTURESOUNDFEATURESLANGUAGEDVDSETUP3 Use [Cursor K / L] to select “Add Channels”, then press[OK].Channel ListAdd ChannelsAntennaAutoprogramPICTURESOUNDFEATURESLANGUAGEDVDSETUP4 Use [the Number buttons] to enter the number of thechannel you want to add, then press [OK].11For analog channels, select a channel to beadded using number keys.For digital channels, you must performAutoprogram function.Add channelsCh Change BackBACKPICTURESOUNDFEATURESLANGUAGEDVDSETUP5 Press [MENU] to exit.Note:• If setup completes successfully,“Added to the channel list” is displayed.• If external input is used, it is not possible to register thechannel and “Unavailable” will be displayed on the TVscreen.• By using [CH + / -], you can select the memorizedchannels only.
