D VD SETTING46EN DVD Language SettingYou can change the desired language when playing back the disc.1 Press [MENU] to display the main menu.PICTURESOUNDSETUPFEATURESLANGUAGEDVDTintShar pnessBrightnessContrastColor00306036Color TemperatureSmar t PictureNormalPersonal2 Use [Cursor K / L] to select “DVD”, then press [OK].PICTURESOUNDSETUPFEATURESLANGUAGEDVDPress “OK” key to move to DVD setup.3 Use [Cursor s / B] to select “ ”, then press [OK].LANGUAGEAUDIO ORIGINALSUBTITLE OFFDISC MENU ENGLISHENTER/OK4 Use [Cursor K / L] to select the desired item, then press[OK].LANGUAGEENTER/OKAUDIO ORIGINALSUBTITLE OFFDISC MENU ENGLISH5 Use [Cursor K / L] to select the desired item, then press[OK].AUDIO *1, *2 (Default: ORIGINAL)Select the desired audio language.LANGUAGEENTER/OKORIGINALENGLISHFRENCHSPANISHGERMANITALIANSWEDISHAUDIOSUBTITLE *1, *2 (Default: OFF)Select the desired subtitle language.LANGUAGEENTER/OKOFFENGLISHFRENCHSPANISHGERMANITALIANSWEDISHSUBTITLEDISC MENU *1 (Default: ENGLISH)Select the desired language in DVD menu.LANGUAGEENTER/OKENGLISHFRENCHSPANISHGERMANITALIANSWEDISHDUTCHDISC MENUNote:• To change the on-screen language, call up “LANGUAGE”from the main menu and set the desired language.(Refer to “Language Selection” on page 24.)*1• Language options are not available with some discs.• If “OTHER” is selected in “AUDIO”, “SUBTITLE” or“DISC MENU” menu, press 4-digit number to enter the codefor the desired language. (Refer to “Language Code List”on page 50.)• Only the languages supported by the disc can be selected.*2• Language setting for Audio and Subtitle are not availablewith some discs.- Use [MODE] to select subtitles available on the DVD.- Use [SAP/AUDIO] to select audio available on the DVD.• If the DVD’s default settings for audio and subtitle are thesame language, the subtitles may not show unless youturn them on.6 Press [MENU] to exit.Settings are only effective when the unit is in DVD mode and any discs should not be played back.